Industrial Process Systems - One Source for your Pump and Process Needs



	corporate overview equipment Pumps ANSI Process Pumps Chopper Pumps End Suction Pumps High Pressure Pumps Magnetically Driven Pumps Submersible Pumps Non-Metallic Pumps Vertical Turbines Self-Priming Pumps Vertical Pumps Sanitary Pumps Gear Pumps Circumferential Piston / Lobe Pumps Progressive Cavity Pumps Air Operated Diaphragm Pumps Drum Pumps Peristalltic Hose Pumps Metering Pumps Piston / Plunger Pumps Mixers Tanks Hose / Fittings Filtration Motors / Drivers / Controls Engineered Systems Heat Exchangers Sealing Systems Valves Couplings Blowers / Vacuum Pumps manufacturers reconditioned equipment service contact home

CIRCUMFERENTIAL PISTON / LOBE PUMPS

Circumferential Piston / Lobe pumps are Positive Displacement Pumps. These pumps are designed with lobes that are offset and rotated in the liquid end of the pump by a set of timing gears in the gear box. The rotors open a cavity on the suction side of the pump allowing fluid to flow into between them, as they rotate this cavity is collapsed and the fluid is forced through the discharge port of the pump.

WRIGHT FLOW TECHNOLOGIES

innomag

Revolution Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 840 Gallons Per Minute Discharge Pressures to: 450psi Temperature to: 307F

innomag

TRA 10 Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 840 Gallons Per Minute Discharge Pressures to: 450psi Temperature to: 307F

innomag

TRA 20 Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 300 Gallons Per Minute Discharge Pressures to: 500psi Temperature to: 300F

innomag

Sterilobe Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 1,000 Gallons Per Minute Discharge Pressures to: 220psi Temperature to: 300F

innomag

Classic + Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 900 Gallons Per Minute Discharge Pressures to: 176psi Temperature to: 300F

innomag

Acculobe Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 900 Gallons Per Minute Discharge Pressures to: 176psi Temperature to: 300F

innomag

RTP Series
	Positive Displacement Pump Design USDA, FDA, 3A Compliant Materials: Stainless Steel Frame Mounted Flows to: 20 Gallons Per Minute Discharge Pressures to: 176psi Temperature to: 300F

Corporate Overview | Equipment | Manufacturers | Reconditioned Equipment | Service | Contact | Home

©2010 Industrial Process Systems. All Rights Reserved.
Kansas City, MO ~ 816-221-9944
Wichita, KS ~ 316-322-7076